pH & Conductivity Meter >> Phan

Standard Features

  • 1
  • Advanced micro-controller based user friendly state-of-the-art design.
  • 2
  • Sleek moulded cabinet with Multifunction splash-waterproof polyester keyboard with soft keys.
  • 3
  • User interactive software with direct keys for ease of operation with protection against invalid entries.
  • 4
  • 20 x 2 line back lighted LCD display.
  • 5
  • Simultaneous measurement of pH, mV and Temperature. SCAN key for displaying the stored pH values with Memory SET & Reading No.
  • 6
  • Non-volatile memory storage of 40 pH readings in four sets of 10 readings each.
  • 7
  • AVERAGE function key to check the Average of the pH reading stored in the selected memory SET.
  • 8
  • MEM CLEAR Key to clear the pH data / reading memory buffer block and calibration data.
  • 9
  • Calibration of instruments with 4.00, 7.00, 9.20 and User Assigned / selected calibration standard with ASSIGN key.
  • 10
  • Built-in ATC with selection of Automatic / Manual mode. ATC temperature at 25° C or at Manually User-entered Temperature. Automatic Temperature Compensation by PT100 Temperature sensor Range 0° to 100° C.
  • 11
  • Input Stability Indication for reproducible results.
  • 12
  • Probe Check Mode for checking Electrode Aging.
  • 13
  • Error indication helps user to trace the problem.
  • 14
  • Audible Beep indication during Valid Key operation.
  • pH Meter, PICO pH Meter, Conductivity Meter, Manufacturers, Suppliers