labindia logo

Tablet Hardness Tester | Single Station TH- 1050

Tablet Hardness tester (TH - 1050M) tablet hardness tester comes with alphanumeric splash waterproof polyester soft keys for keyboard and is equipped with user-interactive software in dialogue mode for the ease of operations. This tablet hardness tester is a perfect entry level model for manual testing of the tablet physical properties. All the five parameters like Thickness, Length, Diameter Hardness and Width can be measured simultaneously.

There is a built in clock and facility for date and time display in Tablet hardness tester TH - 1050M. Automatic run can be performed continuously for upto 99 tablets. Complying to the Pharmcopeias of US/EP/BP/IP.

Get Quote
Get Quote

X
Request Demo
Request Demo
X
Call Now
Labindia Analytical Top Quality Manufacturer of Tablet Hardness Tester TH - 1050 M
Standard Features of Hardness Tester TH 1050 M
  • Advance Micro-controller based user-friendly state-of-the-art product design with alphanumeric splash waterproof polyester soft keys for keyboard. User interactive software in dialogue mode for ease of operation with protection against invalid entries.
  • Single Station Automatic measurement of tablet parameters - Thickness, Width, Diameter/Length, Hardness, Weight.
  • Non-Volatile memory storage of 99 methods with parameters with Alphanumeric entries of Sample Name and Identification Number for authentication.
  • Automatic run can be performed continuously up to 1-99 tablets. RUN can be re-started on power failure or on System Reset with last run parameters.
  • Linear Displacement 0.8mm/sec with fast advance and return movement of breaking arm saves runtime.
  • Daily Auto Incremented Run Number and Factory entered CUSTOMER NAME with Instrument Serial Number on report makes system foolproof and GLP complaint.
  • Two Tier – a] ADMIN, and b] USER password protection for method editing and Validation. 25 Users can be set with Name and password.
  • Built-in Real Time Clock [RTC] for date and time display and on printout.
  • Process Stage and Compression Press no. entry, NMT, NLT and Percentage Limit for detected values of Thickness, Diameter/Length & Hardness with Star mark for out of limit values.
  • Validation/Calibration protocol with verification for Hardness – 3 point Load Cell calibration with Standard weights and Diameter/Length Calibration with Standard gauges.
  • Quick RUN for Independent Thickness, Diameter/Length, Hardness or All parameter measurement in sequence up to 25 sample tablets with GLP information.
  • Error indication on display with Audible alarm helps user to trace the problem.
  • Printer Compatibility for Deskjet, Inkjet & Dot-matrix printer.
Typical Specification
Parameters
TH- 1050
Control

Micro-controller based (Advanced version of microprocessor)

Keyboard

Alphanumeric splash waterproof polyester soft keys.

Display

40 x 2 line back lighted liquid crystal display (LCD)

Test Parameter

No. of Tablets = 1 - 100

1. Thickness

• Measuring Sensor - Linear Transducer
• Measuring Range - 0.1mm to 15.0mm.
• Measuring Unit - mm or inch.
• Measuring Accuracy - better than ± 0.06mm

2. Width (in Separate Mode)

• Measuring Sensor - Stepper controlled Load Touch sensed
• Measuring Range - 0.1mm to 15.0mm
• Measuring Unit - mm or inch
• Measuring Accuracy - better than ± 0.06mm

3. Diameter/Length:

• Measuring Sensor - Stepper controlled Load Touch sensed
• Measuring Range - Diameter 0.1mm to 25.0mm Length 0.1mm to 32.0mm
• Measuring Unit - mm or inch.
• Measuring Accuracy - better than ± 0.06mm.

4. Hardness: Speed Control by Stepper motor

Linear Displacement Range 0.2,0.4,0.6,0.8,1.0,1.2,1.4,1.6 mm/sec with fast advance and return of breaking arm.
• Measuring Sensor - Load Cell - Strain gauge
• Measuring Range - 2N to 500 N. (600N - Optional)
• Measuring Unit - N (Newton’s) / Kp (Kilo Ponds) / Kgf Sc (Strong Cobb) / Lbs / Pound.
• Measuring Accuracy - ± 1N / ± 0.1 KP

5. Weight:

• Manual Entry by User (for reporting purpose)
• Automatic Balance Interface - Sartorius / Mettler when Automatic
Wt. Transfer option is selected.

Method Storage:

99 programs with parameters

Data Storage:

Available with Non-Volatile memory.

Report Format:

a) GLP & Pharmacopoeia compliant report with Statistics (Avg, Min, Max and RSD)
b) Program parameter Report.
c) Validation Reports

Output:

a) Centronics parallel port for Dot matrix / Desk jet Printer.
b) RS232 C ports for
i) Balance connectivity (Sar torius/Mettler)
ii) PC Connectivity for Data Download

Instrument weight:

15 kgs.

Dimensions:

340W x 270H x 380D mm.

Power

110 / 230Vac, ± 10%, 60 / 50 Hz, 50W. option Available.

Environmental Operating Conditions:

a) Operation: Indoor.
b) Temperature: Ambient to 45°C.
c) Humidity: 5 to 90% non-condensing.
d) Altitude: upto 2000m .

 

LABINDIA reserve the right to change specification without notice as part of its continuous product development.

Tablet Hardness Testers