Tablet Hardness Tester - (TH 12 SMART)

Tablet Hardness Tester TH12 Smart is equipped with 7” High-resolution Display with Capacitive Touch Screen along with User interactive software for ease of operation with protection against invalid entries. The Tablet Hardness Tester – (TH 12 SMART) can perform an automatic run of up to 1-100 tablets, in addition to this, the run can be resumed even if it is interrupted by any power failure. Pause & Resume feature gives the user time to adjust the the tablets.

TH 12 Smart tablet hardness tester has a multilevel passing limit to detect the values of Hardness, Length / Diameter, Thickness and Width with marking T1, T2, T3 for displaying the out of limit values. A complete 21 CFR part 11 complaint system with facilities like Audit trail, E Signature, multilevel password etc is inbuilt. For the purpose of safety, user authentication is performed for every operation done by the user of this hardness tester.

Get Quote
Get Quote
X
Request Demo
Request Demo
X
Call On: 9136909578
Sales Support: sales.mfd@labindia.com
Tablet Hardness Tester - TH 12 SMART
Typical Specification
Parameters
TH12 Smart
Control

Micro-controller based (Advanced version of microprocessor)

Display

7" High Resolution Display with Capacitive touch screen

Test Parameter: No. of Tablets

Practically Unlimited Tablets can be checked in a single run

1. Thickness:

• Measuring Sensor - Linear Transducer
• Measuring Range - 0.1mm to 15.0mm
• Measuring Unit - mm, cm or inch
• Measuring Accuracy - better than ± 0.06mm

2. Width (in Separate Mode) :

• Measuring Sensor - Stepper controlled Load Touch sensor
• Measuring Range - 0.1mm to 15.0mm
• Measuring Unit - mm, cm, inch
• Measuring Accuracy - better than ± 0.06mm

3. Diameter/ Length

• Measuring Sensor - Stepper controlled Load Touch sensor
• Measuring Range - Diameter =0.1mm to 25.0mm Length =0.1mm to 32.0mm(check the format)
• Measuring Unit - mm, cm, inch
• Measuring Accuracy - better than ± 0.06mm

4. Hardness: Speed Control by Stepper motor

• Linear Displacement 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6 mnv'sec with fast advance and return of breaking arm.
• Measuring Sensor- Load Cell - Strain gauge
• Measuring Range- 2N to 500N {SOON Optional)
• Measuring Unit - N (Newton's) I Kp (Kilo Ponds) I Kgf{Sc - Strong Cobb) I Lbs (Pound) I UD (User Defined)
• Measuring Accuracy ± 1N

Weight:

Manual Entry by User (for reporting purpose) Automatic Balance Interface - Sartorious, Mettler,etc when Automatic Wt. Transfer option is selected

Method Storage:

Practically Unlimited Methods with Parameter

Data Storage:

External Memory Card {16GB) (Expandable upto 32GB)

Report Format:

*GLP & Pharmacopoeia compliant report with Statistics (Avg, Min, Max and RSD)
*Calibration Report
*Audit Trial Reports

Output:

RS232 C ports for-Balance connectivity USB Port for--Print, Backup, Restore, Software Upgrade LAN Port for-- Print, Backup, Restore

Instrument weight:

16kgs Approx.

Dimensions:

340W x 270H x 4100 mm

Power:

110/220Vac, + 10%, 60 / 50Hz, 50 Watts, Option Available

Envlronmental Operating Conditions:

a) Operation : Indoor
b) Temperature : Ambient to 45c
c) Humidity : 5 to 90% non – condensing
d) Altitude : upto 2000m

 

LABINDIA reserve the right to change specification without notice as part of its continuous product development.

Standard Features of Tablet Hardness Tester - (TH 12 SMART)
  • 7” High resolution Display with Capacitive Touch Screen & User interactive software for ease of operation with protection against invalid entries.
  • Facility for date and time display with Built-in Real Time Clock (RTC)
  • 12 Position Carousal for Automatic measurement of tablet parameters
  • Thickness, Length / Diameter, Weight, Width &. Hardness
  • Automatic run can be performed continuously up to 1-100 tablets. Run can be restarted incase of of interruption due to power failure
  • Alphanumeric entries of Sample Name and Identification/Batch Number for authentication
  • Daily Auto Incremented Run Number for authentication of each test Run
  • Factory entered CUSTOMER NAME, Equipment ID with Instrument Serial Number on report
  • Process Stage,Press Details, comment entry with Identification / Batch No for additional information
  • Multilevel Passing Limit for detected values of Hardness, Length / Diameter, Thickness and Width with markingT1,T2,T3 for out of limit values
  • Calibration for Hardness, Thickness & Length / Diameter/Width :
  • Hardness Calibration & Verification - 3 Point.
  • Thickness Calibration & Verification - 3 Point.
  • Length/Diameter/Width Calibration with 2 point & verification with 3 point.
  • Calibration reminder function
  • Quick RUN for Width, Thickness, Length/Diameter and Hardness measurement or All.
  • The built in Sweeping blades cleans the tablet path for removal of broken pieces, debris & dust.
  • Tablet Auto centering for length measurement as per tablet width / diameter.
  • Groove for better positioning of oblong shape tablets.
  • ‘Run’ halt feature for out of limit value with buzzer alarm & display message indication.
  • ‘Pause’ / ‘Resume’ feature added while measuring Hardness to make a proper alignment of the tablet.
21 CFR Part 11 Compliance
  • Audit Trail for all activities with search facility, report generation and printing
  • 200 & more User ID’s with alphanumeric entries of user name, password and role based privileges selection
  • Multi-level roles with password protection, expiry and complexity
  • User authentication is performed for each and every operation done by user
  • PDF report file can be created through print
  • USB Printing eliminates the need of serial port to connect with instrument.
  • The user can take printout on any local or network printer as well
  • Electronic signature functionality
  • Data Backup & Restore facility available
  • LAN (Ethernet) connectivity for Data backup on Network shared folder
Tablet Hardness Testers